Phenom Basic Sample Preparation Supplies

Overview                                                                

Screen Shot 2018 12 28 at 5.52.14 PMThis section provides the basic preparation supplies  for the Phenom desk top SEM. They are conveniently presented together on this page. Although the Phenom desk top SEMs include operation to avoid charging it is good practice to work with conductive samples and to make sure that the samples are grounded by using conductive adhesives. It is recommended to coat the surface of non-conductive sample with a thin layer of gold, using a sputter coater. When using images to generate data for measurements, it is recommended to calibrate to the system the system first with an EM-Tec magnification calibration standard.


Basic sample preparation supplies


The following recommended basic SEM sample preparation supplies for the Phenom desk top SEMs can be conveniently ordered from this page. Additional information can be found on the relevant product pages.

EM-Tec conductive silver paste or carbon paint to glue sample to sample stubs.    order  |  Product page
EM-Tec conductive copper SEM tape to make grounding paths   order  |  Product page
EM-Tec Silicon finder grid for either multiple small samples or correlative microscopy    order  |  Product page
Conductive tabs to adhere samples such as powder on sample stubs   order  |  Product page
EM-Tec stub gripper tweezers for the Ø12.7, Ø19 and Ø25.4mm SEM sample stubs   order  |  Product page
EM-tec pin stub high capacity storage boxes for 28 and 153 pin stubs   order  |  Product page
EM-Tec preparation pod for pin stubs   order  |  Product page
Value-Tec sample preparation tweezers   order  |  Product page
Value-Tec dust blower   order  |  Product page
Micro-Tec disposable scalpels   order  |  Product page
Micro-Tec white PE PrepBoard   order  |  Product page
Micro-Tec fine needlesor preparing smaller samples   order  |  Product page
Micro-Tec fine probes for preparing smaller samples   order  |  Product page

 

EM-Tec FG-1 Silicon Finder Grid Substrate with 144 fields of 1x1mm for Phenom

EM Tec FG 1 Silicon Finder Grid Substrate with 144 fields of 1x1mm

Product Part Number Price
EM-Tec FG-1 Silicon Finder Grid Substrate with 144 fields of 1x1mm RS-MN-10-008144 $31.99 each
Add to cart

EM-Tec SB4 small size clear styrene box for 4 standard 12.7mm SEM pin stubs for Phenom

EM Tec SB2 large single pin mount storage transport tube for a single 25.4 or 32mm pin stub

Product Part Number Price
EM-Tec SB4 small size clear styrene box for 4 standard 12.7mm SEM pin stubs RS-MN-13-090004 $5.32 each
Add to cart

EM-Tec SB8 small size clear styrene box for 8 standard 12.7mm SEM pin stubs for Phenom

EM Tec SB8 small size clear styrene box for 8 standard 12.7mm SEM pin stubs

Product Part Number Price
EM-Tec SB11 small size clear styrene box for 11 standard 12.7mm SEM pin stubs RS-MN-13-090011 $10.65 each
Add to cart

EM-Tec SB153 high capacity clear styrene box for 153 standard 12.7mm SEM pin stubs for Phenom

EM Tec SB153 high capacity clear styrene box for 153 standard 12.7mm SEM pin stubs

EM-Tec single sided conductive copper SEM tape 6mm x 30m for Phenom

EM Tec single sided conductive copper SEM tape 6mm x 30m

Product Part Number Price
EM-Tec single sided conductive copper SEM tape 6mm x 25mm RS-MN-15-000806 $19.99 each
Add to cart

EM-Tec double sided conductive copper SEM tape 12mm x 33m for Phenom

EM Tec double sided conductive copper SEM tape 12mm x 33m

Product Part Number Price
EM-Tec double sided conductive copper SEM tape 12mm x 33m RS-MN-15-000212 $75.99 each
Add to cart

Conductive Lift-N-Press double sided adhesive tabs, Ø12.5mm for Phenom

Conductive Lift N Press double sided adhesive tabs

Product Part Number Price
High purity conductive double sided adhesive carbon tabs, Ø12.5 mm, pkg/100 RS-MN-15-000413 $24.00 each
Add to cart

High purity conductive double sided adhesive carbon tabs, Ø12mm for Phenom

High purity conductive double sided adhesive carbon tabs 12mm

High purity conductive double sided adhesive carbon tabs, Ø25mm for Phenom

High purity conductive double sided adhesive carbon tabs 25mm

Product Part Number Price
High purity conductive double sided adhesive carbon tabs, 25mm, pkg/50 RS-MN-15-000425 $35.33 each
Add to cart

EM-Tec C30 water based conductive carbon paint, 40g bottle for Phenom

EM Tec C30 water based conductive carbon paint 40g bottle

EM-Tec C39 strong conductive carbon cement, 25g bottle for Phenom

EM Tec C39 strong conductive carbon cement 25g bottle

Product Part Number Price
EM-Tec C38 strong conductive carbon cement, 25g bottle RS-MN-15-001138 $17.32 each
Add to cart

EM-Tec AG42 strong and highly conductive silver cement, 15g bottle for Phenom

EM Tec AG42 strong and highly conductive silver cement 15g bottle

Product Part Number Price
EM-Tec AG42 strong and highly conductive silver cement, 15g bottle RS-MN-15-002141 $66.65 each
Add to cart

EM-Tec PrepPod horizontal stand for 11 standard pin stubs for Phenom

EM Tec PrepPod horizontal stand for 11 standard pin stubs

Product Part Number Price
EM-Tec PrepPod horizontal stand for 11 standard pin stubs RS-MN-15-007510 $73.32 each
Add to cart

EM-Tec small multi stub preparation stand for 23 pin stubs for Phenom

EM Tec small multi stub preparation stand for 23 pin stubs

Product Part Number Price
EM-Tec small multi stub preparation stand for 23 pin stubs RS-MN-15-007523 $26.65 each
Add to cart

EM-Tec medium multi stub preparation stand for 38 pin stubs for Phenom

EM Tec medium multi stub preparation stand for 38 pin stubs

Product Part Number Price
EM-Tec medium multi stub preparation stand for 38 pin stubs RS-MN-15-007538 $30.65 each
Add to cart

Micro-Tec PrepBoard, white HDPE , 29.5x24.5cm for Phenom

Micro Tec PrepBoard white HDPE 29.5x24.5cm

Product Part Number Price
Micro-Tec PrepBoard, white HDPE , 29.5x24.5cm RS-MN-15-008045 $21.32 each
Add to cart

Value-Tec 2.NM general purpose tweezers, style 2, strong pointed tips, non-magnetic stainless steel for Phenom

Value Tec 2.NM general purpose tweezers style 2 strong pointed tips non magnetic stainless steel

Value-Tec 3.NM general purpose tweezers, style 3, fine pointed tips, non-magnetic stainless steel for Phenom

Value Tec 3.NM general purpose tweezers style 3 fine pointed tips non magnetic stainless steel

Value-Tec 4.NM general purpose tweezers, style 4, fine pointed tips, non-magnetic stainless steel for Phenom

Value Tec 4.NM general purpose tweezers style 4 fine pointed tips non magnetic stainless steel

Value-Tec 5A.NM general purpose tweezers, style 5A, off-set finepointed tips, non-magnetic stainless steel for Phenom

Value Tec 5A.NM general purpose tweezers style 5A off set finepointed tips non magnetic stainless steel

Value-Tec 7.NM general purpose tweezers, style 7, curved fine tips, non-magnetic stainless steel for Phenom

Value Tec 7.NM general purpose tweezers style 7 curved fine tips non magnetic stainless steel

Value-Tec set of 5 general purpose tweezers, includes style 3, 5, 5A, 7 and SS (slim long) non-magnetic stainless steel for Phenom

Value Tec set with 5 probes VP1VP2VP3VP4VP6 in plastic pouch 410 stainless steel

EM-Tec 127G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel for Phenom

EM-Tec 12.AM scissor type short handle SEM pin stub gripper for Ø12.7mm pin stubs, anti-magnetic stainless steel for Phenom

EM-Tec 190G.AM SEM pin stub gripper tweezers for Ø19mm pin stubs, anti-magnetic stainless steel for Phenom

EM Tec 190G.AM SEM pin stub gripper tweezers for 19mm pin stubs anti magnetic stainless steel

EM-Tec 254G.AM SEM pin stub gripper tweezers for Ø25.4mm pin stubs, anti-magnetic stainless steel for Phenom

EM Tec 254G.AM SEM pin stub gripper tweezers for 25.4mm pin stubs anti magnetic stainless steel

Micro-Tec PS1 probe set with Micro-Tec PV1 probe holder and Micro-Tec NS set of 8 fine pointed straight stainless steel needle probes for Phenom

Micro Tec PS1 probe set with Micro Tec PV1 probe holder and Micro Tec NS set of 8 fine pointed straight stainless steel needle probes

Micro-Tec PS2 probe set with Micro-Tec PV1 probe holder and Micro-Tec NAS set of 8 fine pointed angled stainless steel needle probes for Phenom

Micro Tec PS2 probe set with Micro Tec PV1 probe holder and Micro Tec NAS set of 8 fine pointed angled stainless steel needle probes

Value-Tec set with 4 probes (VP1/VP2/VP4/VP5) in plastic pouch, 410 stainless steel for Phenom

Value Tec set with 4 probes VP1VP2VP4VP5 in plastic pouch 410 stainless steel

Value-Tec set with 5 probes (VP1/VP2/VP3/VP4/VP6) in plastic pouch, 410 stainless steel for Phenom

Value Tec set with 5 probes VP1VP2VP3VP4VP6 in plastic pouch 410 stainless steel

Value-Tec DB3 long tip air blower / hand duster for Phenom

Value Tec DB3 long tip air blower hand duster

Product Part Number Price
Value-Tec DB3 long tip air blower / hand duster RS-MN-52-003005 $13.32 each
Add to cart

Micro-Tec disposable carbon steel scalpels set with plastic handle contains 2x #10/11/15/20/22, sterile for Phenom

Micro Tec disposable carbon steel scalpels set with plastic handle contains 2x 1011152022 sterile