Rave Scientific
Nanotechnology Instrument Providers and Consultants
- You are here:
- Rave Scientific
- Metallurgical Supplies Overview
- Compact Smart Clip Metallographic Mount Holders for SEM
Compact Smart Clip Metallographic Mount Holders for SEM
Overview of Sample Holders Carbon Tabs Stage Adapters Stub Adapters Sample Preparation
Overview
EM-Tec compact Smart-Clip metallographic mount holders for SEM
The Rave Scientific EM-Tec compact Smart-Clip metallographic mount holders have been specifically designed for compact and table-top SEM’s and for high tilt applications. They comprise a low weight, minimal diameter and allow for very high tilt angles – close to 90 degrees. The metallographic or metallurgical mount is held by 4 copper S-Clips which clamp the side of the mount. In case of non-conductive embeddings, a grounding path can be easily made with one of the copper S-Clips.
The lightweight and thin design only adds around 2 mm to the diameter of the mount, thus allowing for high tilt w/o interfering with detectors under pole-piece of the SEM. The EM-Tec compact Smart-Clip metallographic mount holders are suitable for mounts with a height of 10mm or more. They can also be used as an adapter on SEM’s using pin stubs for holding the cylindrical sample stubs from JEOL and Hitachi with diameters of 25 or 32 mm and a height of 10mm or more.
Features of the EM-Tec compact Smart-Clip metallographic mount holders:
- Lightweight with aluminum disc and copper S-clips
- Designed for Ø25 mm / Ø1“ or Ø30 mm / Ø1-1/4” metallographic mounts
- Suitable for mounts with a height of 10 mm or more
- Allow for high tilt applications
- Ideal for table-top SEMs
- Available with standard pin stub and M4 threaded hole
- Adapters for JEOL and Hitachi stubs on SEM’s for pins tubs
Double use of holders RS-MN-12-002932 and RS-MN-12-003932 By moving the clip from the chokes to the widening parts of the bottom of holders 12-002932 and 12-003932, you can use these holders for both Ø30mm mounts and Ø1-1/4-inch mounts.
Specifications of the EM-Tec compact Smart-Clip metallographic mount holders
| Product # |
Type |
Mount sizes |
Dimensions w/o pin |
Mount holding |
SEM stage comp |
|
EM-Tec MC26 |
Ø25mm / Ø1” |
Ø27.5 x 13.5 mm |
4 Clips |
Ø3.2mm pin |
|
|
EM-Tec MC26 |
Ø25mm / Ø1” |
Ø27.5 x 13.5 mm |
4 Clips |
M4 thread |
|
|
EM-Tec MC32 |
Ø30mm |
Ø32 x 13.5 mm |
4 Clips |
Ø3.2mm pin |
|
|
EM-Tec MC32 |
Ø1-1/4” |
Ø33.8 x 13.5 mm |
4 Clips |
Ø3.2mm pin |
|
|
EM-Tec MC32 |
Ø30mm |
Ø32 x 13.5 mm |
4 Clips |
M4 thread |
|
|
EM-Tec MC32 |
Ø1-1/4” |
Ø33.8 x 13.5 mm |
4 Clips |
M4 thread |
