Gripping Stub & Stub Based Vise Holders

 

Overview of Sample Holders              Carbon Tabs            Stage Adapters             Stub Adapters            Sample Preparation 

Overview

Rave Scientific offers the EM-Tec gripping stub and stub based vise holders. These holders are useful to grip and hold SEM samples without much need for sample preparation. Ideal for cross-section and edge-on imaging. The comprehensive selection of this type of cost-effective gripping and vise type holders is compatible with all SEMs using pin stubs from FEI, Zeiss, Tescan, Phenom, ASPEX and M4 threaded sample holders from Hitachi and JEOL SEMs.

EM-Tec pin stub compatible gripping stub and stub based vise holders:

  • EM-Tec GS24 gripping stub holder with pin and clamping plate to hold samples or tissue up to 4mm thick.  Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CDP processing.  Holder size is 24x13x12mm; fits in any SEM using standard 3.2mm pin stubs. Ref: McTurk, G., Bulman, S., Ocklefors, C.C. Journal of microscopy 127,233. 1982.
  • EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw.  Most effective way to study cross section of thin samples. Holder size w/o pin is Ø12.7x7.2mm.
  • EM-Tec PS6 mini pin stub split vise clamp for sample thickness from 0-6mm. The sample is clamped between the two mini vise clamps. The split vise jaws are closed by an allen screw. Closed split vise diameter is 12.7mm; when opened it is 19x12.7mm.
  • EM-Tec PS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two vise jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed split mount vise dimensions are Ø15x10mm; when opened 23x15x10mm.
  • EM-Tec PS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø15x6mm.
  • EM-Tec PS12 pin stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw.  Most effective way to study cross section of thin samples. Holder size w/o pin is Ø25x6mm.


EM-Tec gripping stub and stub based vise holders with M4 thread:

  • EM-Tec GS24 gripping stub holder M4 with clamping plate to hold samples or tissue up to 4mm thick.  Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CDP processing.  Holder size is 24x13x12mm; M4 threaded hole in base. Ref: McTurk, G., Bulman, S., Ocklefors, C.C. Journal of microscopy 127,233. 1982.
  • EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw.  Simple and cost-effective way to clamp cross section of thin samples. Holder stub size is Ø15x10mm xM4.
  • EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two vise jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed split mount vise dimensions are Ø15x10mm; when opened 23x15x10mm.
  • EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of Ø25x10mm xM4.
  • EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size w/o pin is Ø15x6mm.


EM-Tec JEOL stub based vise holders:

 

Price

$33.32 each

EM-Tec PS6 mini pin stub split vise clamp for sample thickness from 0-6mm. The sample is clamped between the two min vise clamps. The split vise jaws are closed by an allen screw. Closed split vise diameter is 12.7mm; when opened it is 19x12.7mm.

 

Price

$10.65 each

EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross sections of thin samples. Holder size w/o pin is Ø12.7x7.2mm.

 

Price

$26.65 each

EM-Tec PS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø15x6mm.

 

Price

$33.32 each

EM-Tec PS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm.(M4)

 

Price

$25.32 each

 

Price

$33.32 each

 

Price

$39.99 each

EM-Tec GS24 gripping stub with clamping plate to hold cross section samples or tissue up to 4mm thickness. Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CPD processing. Holder dimensions are 24x12x12mm, standard Ø3.2mm pin.

 

Price

$33.32 each

EM-Tec PS12 pin stub vise clamp for sample thickness from 0-12mm. The sample is held vertically with a set screw. Most effective way to study cross section of thin samples. Holder size w/o pin is Ø25x6mm.

 

Price

$24.67 each

EM-Tec PS5 mini pin stub to clamp round shaped samples up to Ø3.5mm. Samples are held by a set screw. Pin stub top diameter is 12.7mm.

 

Price

$24.67 each

EM-Tec PS8 mini pin stub to clamp round shaped samples up to Ø6.0mm. Samples are held by a set screw. Pin stub top diameter is 12.7mm.

 

Price

$37.32 each

 EM-Tec GS24 gripping stub with clamping plate to hold cross section samples or tissue up to 4mm thickness. Sample is held by the clamping plate which is pushed with set screws. Also useful for holding tissue for dehydration and CPD processing. Holder dimensions are 24x12x12mm x M4.

 

Price

$25.32 each

EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw. Simple and cost-effective way to clamp cross sections of thin samples. Holder stub size is Ø15x10mmxM4.

 

Price

$33.32 each

EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of Ø25x10mmxM4.

 

Price

$26.65 each

EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size w/o pin is Ø15x6mm.

 

Price

$33.32 each

 EM-Tec HS16 M4 cylinder stub to clamp round shaped samples up to Ø16mm in diameter. Samples are held by a set screw in the middle of a 25mm Hitachi stub. Holder stub size is Ø25x10mmxM4.

 

Price

$31.99 each

EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm.

Results 1 - 16 of 16