Swivel Tilt Sample Holders
Overview of Sample Holders SEM Stubs Stage Adapters Stub Adapters Sample Preparation
Overview
Rave Scientific offers the EM-Tec swivel sample holders. These holders enable full tilting both ways in any direction. This is ideal for viewing samples at multiple angles, even offering tilt directions normally not available on your SEM. The EM-Tec swivel tilt sample holders are ideal for adding tilt facilities on table top SEMs. The EM-Tec swivel sample holders include a hinge which can be locked with a screw at any angle through a +/- 90 degrees range. The base (pin or cylinder stub) can be rotated when mounted and offers tilt directions in a full half sphere. The EM-Tec swivel sample holders are now available for all SEMs:
The range of EM-Tec swivel sample holders
Product #
Price
$51.99 each
The head of the mount is attached to the pin via a swivel hinge which allows for 90 degrees tilting each way. Excellent mount for SEMs without tilting facilities or when random tilt angled are needed. When the desired tilt angle is set, the top is secured with a socket cap screw. Top diameter is 15mm and height above pin is 15mm.
Product #
Price
$53.32 each
EM-Tec PS17 mini swivel vise mount to hold samples or cross section up to 4mm thickness. The sample is held by a set screw. Sample can be tilted both ways up to full 90° tilt angle. Holder size w/o pin is Ø12x18mm.
Product #
Price
$63.99 each
EM-Tec HSM4 swivel mount adapter with M4 screw accepts small Hitachi stub and Hitachi sample holders with an M4 threaded hole. The swivel hinge allows for tilting 90° both ways to investigate samples at different tilt angle. Cost effective way to turn stubs and small holders into swivel stubs and swivel holders. Adapter size is Ø9x20mm.
Product #
Price
$91.99 each
EM-Tec HS19 swivel stub vise clamp for sample thickness from 0-16mm. The sample is held with a set screw (multiple length are provided). The swivel hinge allows close to 90° tilt both ways. Holder size is Ø25x30mm xM4.
Product #
Price
$93.32 each
EM-Tec HS18 mini swivel split mount vise for samples up to 8mm thickness. The sample is held between the mini vise clamps. This swivel holder allows can be tilted 90° both ways. Holder size is Ø15x30mm xM4.
Product #
Price
$66.65 each
EM-Tec HS17 mini swivel vise holder for sample thickness up to 4mm. Sample is held with a set screw; ideal for Si chips and thin sample cross sections. This swivel holder allows for full 90° tilt both ways. Holder size is Ø12x23mm xM4.
Product #
Price
$121.33 each
EM-Tec HGS10 swivel head sample holder is made from gold plated brass to enable easy cleaning and to resist contamination. Maximum sample thickness is 10mm; sample is clamped with two thumb screws. Sample can be clamped from opposite ways. This swivel holder allows for full 90° tilt both ways. Holder size is 28x16x32mm x M4.