Green PET Polyester Mylar Tapes

rs mn Green PET polyester mylar tapes

Overview

Rave Scientific offers single sided green PET lab tape which consists of a polyester (mylar) film with a silicone adhesive. It is alo known as anodising or powder coating masking tape. The tape is self wound without a liner. Advantages of the green PET lab tape are:

Low adhesive tranfer
Leaves clean surfaces after removal
Low outgassing under vacuum
Excellent masking properties
Can be easily removed
Suitable for temporary or transfer applications

If used as temporary tape or transfer tape, only apply minimal pressure. The green PET lab tape is an economical alternative for Kapton tape in less demanding applications and when temperatures are lower than 200°C. With the thicker film and the lower adhesion properties of the silicone based adhesive, the tape is easy to remove and leaves clean surfaces.

Applications

Masking for vacuum deposition
Masking for powder coating and anodising
Holding samples or parts in high vacuum
Positioning tape
General laboratory tape
Transfer tape
Temporary sealing tape.

Available in widths from 6 to 50mm with a length of 20m. Clean 76mm diameter plastic core.

Specifications

Tape material	PET – polyester (mylar)
Colour	Green tinted
Adhesive	Silicone adhesive
Film thickness	0.05mm
Adhesive thickness	0.04mm
Total tape thickness	0.09mm
Adhesive strength	10N / 25mm
Tape strength	135 kPa
Dielectric strength	4.5 kV
Use temperature range	-20 to +204 °C
Length	20m
Core diameter	76mm (3”)