EM-Tech C-Square Multi Square Pin Stub Holders

12 003335 and 12 002335 page

Overview

The EM-Tec C-Square multi pin stub holders are primarily designed to hold multiple Ø12.7mm and/or Ø25.4mm pin stubs with the standard 3.2mm pin diameter. Larger or smaller pin stubs can also be used on the EM-Tec C-Square multi pin stub holders. They offer optimum X-Y coverage of the SEM stage and allow for easy alignment with the square sides and additionally engraved lines in X-Y directions. To facilitate quick and easy loading and exchange of the pin stubs, proprietary conductive gripping O-rings hold the pin stubs in place and provide a conductive path at the same time. The EM-Tec C-Square multi pin stub holders are available in 7 different sizes:

EM-Tec CS9/4 C-Square multi pin stub holder for 9x Ø12.7mm or 4 x Ø25.4mm pin stubs

EM-Tec CS16/4 C-Square multi pin stub holder for 16x Ø12.7mm or 4 x Ø25.4mm pin stubs
EM-Tec CS18/6 C-Square multi pin stub holder for 18x Ø12.7mm or 6 x Ø25.4mm pin stubs
EM-Tec CS25/4 C-Square multi pin stub holder for 25x Ø12.7mm or 4 x or 9 x Ø25.4mm pin stubs
EM-Tec CS36/9 C-Square multi pin stub holder for 36x Ø12.7mm or 9 x Ø25.4mm pin stubs
EM-Tec CS49/9 C-Square multi pin stub holder for 49x Ø12.7mm or 9 x Ø25.4mm pin stubs
EM-Tec CS64/16 C-Square multi pin stub holder for 64 x Ø12.7mm or 16 x Ø25.4mm pin stubs

Product #	Style	Ø12.7 stubs	Ø25.4 stubs	Pattern	Pitch Ø12.7	Size	SEM stage comp.
RS-MN-12-002332	EM-Tec CS9/4 C-Square	9	4	3x3	14 mm	42x42mm	Standard Ø3.2 mm pin
RS-MN-12-003332	EM-Tec CS9/4 C-Square	9	4	3x3	14 mm	42x42mm	M4
RS-MN-12-006332	EM-Tec CS9/4 C-Square	9	4	3x3	14 mm	42x42mm	Ø14mm JEOL stub
RS-MN-12-002333	EM-Tec CS16/4 C-Square	16	4	4x4	14 mm	56x56 mm	Standard Ø3.2 mm pin
RS-MN-12-003333	EM-Tec CS16/4 C-Square	16	4	4x4	14 mm	56x56 mm	M4
RS-MN-12-006333	EM-Tec CS16/4 C-Square	16	4	4x4	14 mm	56x56 mm	Ø14mm JEOL stub
RS-MN-12-002338	EM-Tec CS18/6 C-Square	18	6	3x6	16 mm	48x96 mm	Standard Ø3.2 mm pin
RS-MN-12-003338	EM-Tec CS18/6 C-Square	18	6	3x6	16 mm	48x96 mm	M4
RS-MN-12-006338	EM-Tec CS18/6 C-Square	18	6	3x6	16 mm	48x96 mm	Ø14mm JEOL stub
RS-MN-12-002334	EM-Tec CS25/4 C-Square	25	4 or 9	5x5	14 mm	70x70 mm	Standard Ø3.2 mm pin
RS-MN-12-003334	EM-Tec CS25/4 C-Square	25	4 or 9	5x5	14 mm	70x70 mm	M4
RS-MN-12-006334	EM-Tec CS25/4 C-Square	25	4 or 9	5x5	14 mm	70x70 mm	Ø14mm JEOL stub
RS-MN-12-002335	EM-Tec CS36/9 C-Square	36	9	6x6	14 mm	84x84 mm	Standard Ø3.2 mm pin
RS-MN-12-003335	EM-Tec CS36/9 C-Square	36	9	6x6	14 mm	84x84 mm	M4
RS-MN-12-006335	EM-Tec CS36/9 C-Square	36	9	6x6	14 mm	84x84 mm	Ø14mm JEOL stub
RS-MN-12-002336	EM-Tec CS49/9 C-Square	49	9	7x7	14 mm	98x98 mm	Standard Ø3.2 mm pin
RS-MN-12-003336	EM-Tec CS49/9 C-Square	49	9	7x7	14 mm	98x98 mm	M4
RS-MN-12-006336	EM-Tec CS49/9 C-Square	49	9	7x7	14 mm	98x98 mm	Ø14mm JEOL stub
RS-MN-12-002337	EM-Tec CS64/16 C-Square	64	16	8x8	14 mm	112x112 mm	Standard Ø3.2 mm pin
RS-MN-12-003337	EM-Tec CS64/16 C-Square	64	16	8x8	14 mm	112x112 mm	M4
RS-MN-12-006337	EM-Tec CS64/16 C-Square	64	16	8x8	14 mm	112x112 mm	Ø14mm JEOL stub

The EM-Tec C-Square multi pin stub SEM holders are available with:

Standard pin to fit on SEM's which use the standard pin; FEI, Philips, Tescan, Phenom, Pemtron, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, ETEC and Novascan SEMs.
M4 threaded hole compatible with Hitachi SEMs, FESEMs and table top SEMs and with the EM-Tec versatile SEM stage adapters