Rave Scientific
Nanotechnology Instrument Providers and Consultants
- You are here:
- Rave Scientific
- SEM Sample Holders
- Small sample holders
Small Sample Holders
Overview of Sample Holders SEM Stubs Stage Adapters Stub Adapters Sample Preparation
Overview
Rave Scientific offers the EM-Tec stub based SEM sample holders which are small SEM sample holders based on (modified) SEM sample stubs. They have the same footprint as the original SEM sample stubs and are directly compatible with the SEM stage or SEM sample stub holder. These affordable sample holders increase efficiency and reduce sample preparation time. Using sample holders reduces the use of conductive adhesives which can be a source of contamination. The EM-Tec stub based small sample holders formats are:
- Standard pin stub based compact sample holders
- JEOL cylinder stub based sample holders
- Hitachi M4 stub based sample
The pin stub based sample holders comprise the largest selection; they can be easily used on other SEM platforms by using the cost efficient EM-Tec SEM stub adapters. All EM-Tec compact SEM stub based SEM sample holders are precision machined from vacuum grade aluminum unless otherwise noted. Provided with set screws and allen keys.
Product #
Price
$39.99 each
The samples are held vertically with 4 small set screws. Most effective way to study cross sections or thin samples. Holder size w/o pin is Ø25.4 x 7.2mm. Standard pin.
Product #
Price
$71.99 each
EM-Tec TV12 mini variable tilt mount allows 0-90° angle in a small sample mount. The sample needs to be mounted on the tilting platform of this compact holder. Side engravings on the tilting platform assist in setting the desired tilt angle. Practical holder to examine sample under an angle.
Product #
Price
$51.99 each
The head of the mount is attached to the pin via a swivel hinge which allows for 90 degrees tilting each way. Excellent mount for SEMs without tilting facilities or when random tilt angled are needed. When the desired tilt angle is set, the top is secured with a socket cap screw. Top diameter is 15mm and height above pin is 15mm.
Product #
Price
$53.32 each
EM-Tec P35 fixed 35°pre-tilt holder for Tescan FIB systems, Ø12.7x17mm, pin
each
Product #
Price
$25.32 each
EM-Tec HS2 mini M4 cylinder tub/needle clamp. Capacity is Ø2mm maximum, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. The perfect holder for the Cameca Atom Probe Microscope needle shaped samples. Holder size is Ø15x10mmxM4.
Product #
Price
$25.32 each
EM-Tec HS6 mini M4 cylinder stub vise clamp for sample thickness from 0-6mm. The sample is held vertically with a small set screw. Simple and cost-effective way to clamp cross sections of thin samples. Holder stub size is Ø15x10mmxM4.
Product #
Price
$33.32 each
EM-Tec HS15 M4 cylinder stub vise clamp for sample thickness from 0-16mm. The sample is held vertically with a set screw (multiple lengths are supplied). Cost effective and practical small vise clamp base on the stub size of Ø25x10mmxM4.
Product #
Price
$26.65 each
EM-Tec HS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer like samples for cross section imaging. Sample are clamped by set screws. Holder size w/o pin is Ø15x6mm.
Product #
Price
$97.32 each
EM-Tec SC2 SampleClamp with a clamping area of 25x15mm. Longer and thicker wire, strips, fibers, cables can be clamped down with the strips at the side to examine the outside surface. No use of adhesive keeps the surface clean and allows for rotating the sample to examine the sample at different angles.
Product #
Price
$25.32 each
EM-Tec HS3 mini M4 cylinder stub SampleClamp to clamp thin samples, foils, Si wafer pieces etc. directly on the stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Holder stub size is Ø15x10mmxM4.
Product #
Price
$31.99 each
EM-Tec HS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm.
Product #
Price
$26.65 each
EM-Tec PS2 mini pin stub tube/needle clamp. Capacity is up to Ø2mm diameter, the needle is secured with a small set screw. This holder is ideal for probes, needles, wire and thin tubes. Holder size is Ø6x4mm. Made from brass and plated with 1µm of pure gold.
Product #
Price
$38.65 each
EM-Tec H3 multi stub adapter for 3 x Ø15mm Hitachi stubs. Compact and simple multi stub adapter based on the Hitachi Ø25x6mmxM4 stub.
Product #
Price
$33.32 each
EM-Tec PS6 mini pin stub split vise clamp for sample thickness from 0-6mm. The sample is clamped between the two min vise clamps. The split vise jaws are closed by an allen screw. Closed split vise diameter is 12.7mm; when opened it is 19x12.7mm.
Product #
Price
$10.65 each
EM-Tec PS4 mini pin stub vise clamp for sample thickness from 0-4mm. The sample is held vertically with a small set screw. Most effective way to study cross sections of thin samples. Holder size w/o pin is Ø12.7x7.2mm.
Product #
Price
$26.65 each
EM-Tec PS7 mini pin stub dual slot vise with two slots of one mm wide. Ideal for holding thin wafer pieces samples for cross section imaging. Samples are clamped by set screws. Holder size w/o pin is Ø15x6mm.
Product #
Price
$33.32 each
EM-Tec PS16 pin stub to clamp round shaped samples up to Ø16.0mm. Samples are held by a set screw. Pin stub top diameter is 25mm.
Product #
Price
$33.32 each
EM-Tec PS9 mini split mount vise clamp for sample thickness from 0-8mm. The sample is clamped between the two jaws of the split mount. The split mount vise jaws are closed by two allen screws. Closed mini split mount vise dimensions are Ø15x10mm; when opened 24x15x10mm.(M4)
Product #
Price
$25.32 each
EM-Tec PS3 mini pin stub SampleClamp to clamp thin samples, foils, Si wafer pieces, etc. directly on the small stub. Samples are held down by a washer under the small screw. More effective and cleaner than using tape or conductive paint/paste. Pin stub diameter is 12.7mm.
