Rave Scientific
Nanotechnology Instrument Providers and Consultants
- You are here:
- Rave Scientific
- SEM Sample Holders
- Filter Disk Holders
Filter Disk Holders
Overview of Sample Holders Carbon Tabs Stage Adapters Stub Adapters Sample Preparation
Overview
Rave Scientific offers the EM-Tec filter disc holders. These holders are specifically developed to hold flat discs type filters to enable SEM / EDS analysis. The EM-Tec filter disc holders comprise of two parts; a flat base plate to hold the filter disc and a cap which acts as clamping ring to keep the filter flat on the base. The cap is secured with three screws at the side of the base plate. The base plate and clamping ring are made from vacuum aluminium; the screws are made form stainless steel. The EM-Tec filter disc holders are available for 13, 25, 35 and 47mm filter discs. Custom diameters can be made on request. The edge of the cap has a 45° angle to avoid contribution of aluminium to the EDS spectra. The EM-Tec filter disc holders enable SEM / EDS analysis of particles, fibres and debris on the filters. They are available with:
- Standard pin to fit on SEM usingthe standard pin; FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs.
- M4 threaded hole; compatible with Hitachi SEMs, FESEMs and table top SEMs and with the EM-Tec versatile SEM stage adapters
- The EM-Tec XL 100 multi-filter holder, which has been developed to hold up to 4 filter disc holders in the SEM chamber. This multi-holder is compatible with all filter disc holders.
| Product # | Type | Filter sizes | Dimensions w/o pin | Securing method | SEM stage comp. |
|---|---|---|---|---|---|
| RS-MN-12-000283 | F13 | Ø13mm | Ø17.0x9.5mm | Clamp ring/screws | Standard 3.2mm pin |
| RS-MN-12-000383 | F13 | Ø13mm | Ø17.0x9.5mm | Clamp ring/screws | M4 thread |
| RS-MN-12-000285 | F25 | Ø25mm | Ø29.0x9.5mm | Clamp ring/screws | Standard 3.2mm pin |
| RS-MN-12-000385 | F25 | Ø25mm | Ø29.0x9.5mm | Clamp ring/screws | M4 thread |
| RS-MN-12-000291 | F35 | Ø35mm | Ø39.0x9.5mm | Clamp ring/screws | Standard 3.2mm pin |
| RS-MN-12-000391 | F35 | Ø35mm | Ø39.0x9.5mm | Clamp ring/screws | M4 thread |
| RS-MN-12-000287 | F47 | Ø47mm | Ø51.0x9.5mm | Clamp ring/screws | Standard 3.2mm pin |
| RS-MN-12-000387 | F47 | Ø47mm | Ø51.0x9.5mm | Clamp ring/screws | M4 thread |
