Phenom Tabletop SEM Stubs & Sample Holders

Overview xl mounting pillar phenom

The EM-Tec sample holders and sample stubs offered on these pages are fully compatible with the Phenom desk top SEMs. One can extend the versatility of the Phenom microscopes, increase productivity, and unlock additional applications with our sample holders.  They are divided into groups depending on the compatibility of the EM-Tec holders.

  • EM-Tec sample holders compatible with the Phenom ProX, Pro and Pure.
  • Additional sample holders compatible with the Phenom metallurgical sample holders used on the Phenom ProX, Pro and Pure.
  • EM-Tec PH6 XL mounting pillar and additional sample holders compatible with the Phenom XL.
  • EM-Tec S-Clip holders compatible with the Phenom ProX, Pro and Pure.
  • EM-Tec stub adapters for using JEOL and Hitachi stubs on the Phenom desk top SEM.
  • EM-Tec sample stubs compatible with the Phenom ProX, Pro and Pure
     

 With the EM-Tec sample holders, the versatility of the Phenom desk top SEMs is enhanced and additional applications can be easily unlocked.
The Phenom XL with its larger sample stage is compatible with pin stubs up to 100mm diameter and pin stub based SEM sample holders of up to 100x100x65mm. For the Phenom XL we invite you to explore the vast EM-Tec range of practical of SEM sample holder to increase productivity with the Phenom XL.

 

xl mounting pillar phenom2

EM-Tec PH6 XL mounting pillar and additional sample holders for the Phenom XL

The Phenom XL desk top SEM with the large stage has a capacity of 100x100x65mm (L x W x H). The unique pin plate allows for either large sample, multiple samples and large sample holders with pin.  Alternatively, the unique XL mounting pillars can be used to clamp samples between the mounting pillar. The XL mounting pillars can be freely positioned in the XL pin plate to accommodate large, awkward and even multiple samples. The XL mounting pillar are sold in sets of three and consists of the pin plate compatible pillars with standard 3.2mm pin and M3 threaded holes and 16mm long M3 threaded thumb screws. Alternatively, other M3 threaded screws  can be used to hold a sample. Each XL pillar has two threaded holes for added versatility.

 

 


Phenom Stubs and Holders