Soft Jaw Lining Kit & Matching Vise Holders

 

 Overview of Sample Holders              Carbon Tabs            Stage Adapters             Stub Adapters            Sample Preparation 

 

rs mn 12 003207

Overview

Rave Scientific offers the EM-Tech conductive soft jaw lining kit for vise type SEM sample holders.This jaw lining kit comprises a conductive neoprene rubber sheet with a conductive adhesive layer on one side. It is intended to hold more delicate samples and to prevent marring or damaging sensitive surfaces. The conductive medium soft rubber provides both a soft grip and a grounding path.

The EM-Tec conductive soft jaw lining kit has been designed for use on EM-Tec SEM sample holders, but is equally useful on SEM sample holders of other brands. It comes as one piece and can be cut to size as required. After use it can be easily replaced on or removed from the vise jaws (use acetone/isopropanol for cleaning). Supplied as a sheet which holds enough material to cut 5-6 sets of soft jaw linings.

The EM-Tec conductive soft jaw lining kit can be matched with any of the vise SEM sample holders on this page:

 

 

Price

$659.99 each

EM-Tec CV1 large centering vise with a clamping capacity from 0-110mm. Clamping size can be increased to 155mm with the optional EM-Tec CVE1 extension pIates. Includes two standard triple grooved/smooth clamping jaws which are positionable on the baseplate. The EM-Tec-CV1 centering vise can be operated from both sides; two knurled handles are provided. For ease of operation a removable spindle extension is include with the centering vise. Overall size closed is 106x40x34mm, overal size open is 122x40x34mm. M4 threaded hole in the base for Hitachi SEMs and the versatile EM-Tec stage SEM stage adapters.

 

Price

$646.65 each

EM-Tec CV1 large centering vise with a clamping capacity from 0-110mm.Clamping size can be increased to 155mm with the optional EM-Tec CVE1 extension pIates. Includes two standard triple grooved/smooth clamping jaws which are positionable on the baseplate. The EM-Tec-CV1 centering vise can be operated from both sides; two knurled handles are provided. For ease of operation a removable spindle extension is include with the centering vise. Overall size closed is 106x40x34mm, overal size open is 122x40x34mm. M4 threaded hole in the base for Hitachi SEMs and the versatile EM-Tec stage SEM stage adapters.

 

Price

$23.99 each

The EM-Tec conductive soft jaw lining kit for vise type SEM sample holders comprises a conductive neoprene rubber sheet with a conductive adhesive layer on one side. It is intended to hold more delicate samples and to prevent marring or damaging sensitive surfaces. The conductive medium soft rubber provides both a soft grip and a grounding path.

 

Price

$146.65 each

This sample holder has one fixed jaw and a spindle driven moving jaw. The jaw height is 10mm, clamping width is 25mm. Cost-effective compact vise which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminum, brass spindle and stainless steel screws

 

Price

$238.65 each

EM-Tec VS42 universal double sided spring-loaded larger vise is for samples with a maximum vise opening of 42mm. Different types of jaws can be mounted on the EM-Tec universal spring-loaded vise. The holders opens by pulling the jaws. Dowel pins can be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Holder includes triple grooved/smooth vise jaws. Optionally available with this holder are: Vise jaw with a single 120° large groove for accommodating round samples. Made from vacuum grade aluminum, brass sliders and stainless steel rods and springs.

 

Price

$199.99 each

 EM-Tec VS12 is a compact single action spring-loaded vise for samples with a maximum clamping size of 12mm. The vise is opened by pushing the moving vise jaw with a push rod. The push rod can be removed when the holder is loaded in the SEM. Dowel pins can be inserted in the fixed and moving jaws to increase the opening to a sample size up to 18mm diameter or to hold awkwardly shaped samples; 4 dowel pins are included. Made from vacuum grade aluminium with stainless steel rods and springs.

 

Price

$297.32 each

EM-Tec VS26 is a compact double action spring-loaded vise for sample with a maximum clamping size of 26mm with pin. Due to the double sided spring, this vise acts as a centering vise. The vise jaws are opened by push rods which can be remove when the sample holder is loaded in the SEM. Dowel pins can be inserted in the jaws to increase sample size up to 34mm diameter or to hold irregular shaped samples; 4 dowel pin are included. Made from vacuum grade aluminium and stainless steel rods and springs.

 

Price

$233.32 each

EM-Tec VS42 universal double sided spring-loaded larger vise for samples with a maximum vise opening of 42mm. Different type of jaws can be mounted on the EM-Tec universal spring-loaded vise. Opens by pulling the jaws. Dowel pin pins be inserted in the brass slider to extend the opening size and to hold awkwardly shaped samples. With the dowel pins a disc of up 50mm diameter can be held; 4 dowel pins are included. Includes triple grooved/smooth vise jaws. Additional optionally available vise jaws are:

Results 1 - 8 of 8