Rave Scientific
Nanotechnology Instrument Providers and Consultants
- You are here:
- Rave Scientific
- Sample Preparation
- Tools
- Diamond Scribbers
Diamond Scribers
Overview
Introduction
These dedicated scribing tools are useful for marking, engraving and scribing samples, tools and specimen substrates. Available with either a sharp tungsten carbide tip or with diamond tips in various tip angles and styles.
The natural diamond tips base sizes are approximately 0.8mm in diameter and vacuum brazed on a tool steel shaft. Scribers can be used to make fine lines on a wide variety of materials ranging from glass, ceramics, silicon, metals and plastics. They are also ideal for scribing silicon wafers prior to cleaving.
Specifications of the scribing tools
Specifications of the scribing tools
|
Product # |
Style |
Tip |
Tip angle |
Type |
Length |
|
Value-Tec CS1 |
Tungsten Carbide |
45 degrees |
Knurled handle |
150mm |
|
|
Micro-Tec DS2 |
Diamond |
60 degrees |
Knurled handle |
150mm |
|
|
Micro-Tec DS4 |
Diamond |
90 degrees |
Knurled handle |
150mm |
|
|
Micro-Tec DS5 |
Diamond |
120 degrees |
Retractable pen |
140mm |
Product #
Price
$13.32 each
The Value-Tec CS1 carbide tipped scriber is intended for scribing and marking samples, sample mounts, embeddings and parts. Equally useful for scribing or marking for wafer cleaving. Sharp 45° tungsten carbide tip on a 3.2mm (1/8) shaft. The tungsten carbide tip can scribe in steel, brass, aluminum, copper, plastics, etc. Can be used to scribe glass, but will wear quicker than diamond scribers. Pen type scriber with a body diameter of 7.5mm and a total length of 150mm. Sleek knurled coated steel body for excellent grip with a removable clip.
Product #
Price
$6.67 each
Replacement tungsten carbide tip for the Value-Tec CS1 carbide tip scriber. Sharp 45° tungsten carbide tip on a 3.2mm (1/8 inch) shaft with a length of 32mm.
Product #
Price
$24.67 each
The Micro-Tec DS2 diamond tipped scriber is intended for scribing glass, ceramics, silicon, metals, etc. Particularly useful for scribing silicon wafers prior to cleaving. Sharp 60° diamond tip on a 3mm shaft for fine engraving and markings. Longer lasting then tungsten carbide tips when properly used. Pen type scriber with a body diameter of 7.5mm and a total length of 150mm. Sleek knurled coated steel body for excellent grip with a removable clip.
Product #
Price
$24.67 each
The Micro-Tec DS4 diamond tipped scriber is intended for scribing lines in glass, ceramics, silicon, metals, etc. Particularly useful for scribing silicon wafers prior to cleaving. Stronger 90° diamond tip on a 3mm shaft for engraving and markings. Longer lasting then tungsten carbide tips when properly used. Pen type scriber with a body diameter of 7.5mm and a total length of 150mm. Sleek knurled coated steel body for excellent grip with a removable clip.
Product #
Price
$34.00 each
The Micro-Tec DS5 diamond tipped scriber is a ball point style scriber with retractable tip intended for scribing glass, ceramics, silicon, metals, etc. Particularly useful for scribing silicon wafers prior to cleaving. Stronger 120° diamond tip on a 3mm tool steel shaft for engraving and markings. Nickel plated metal body with spring type retracting mechanism. The diamond tip is protected when the diamond tip is retracted. Diameter is this ball point style scriber is 11mm and overall length is 140mm.