JEOL NeoScope Stage Holders and Stubs
Overview
In addition to the SEM mounts and holders for the JEOL NeoScope series table top SEMs, basic SEM sample preparation supplies are necessary for optimum sample preparation and correct imaging and analysis. They are conveniently brought together on this page. Although the JEOL NeoScope table top SEMs include operation modes to avoid charging it is easier to work with conductive samples and samples which are grounded by using conductive adhesives. It is recommended to coat the surface of non-conductive sample with a thin layer of gold, using a sputter coater. When using images to generate data for measurements, it is recommended to calibrate to the system the system first with an EM-Tec magnification calibration standard.
Basic sample preparation supplies
The following recommended basic SEM sample preparation supplies for the JEOL NeoScope can be conveniently ordered from this page. Additional information can be found on the relevant product pages.
EM-Tec conductive silver paste or carbon paint to glue sample to sample stubs.
EM-Tec conductive copper SEM tape to make grounding paths.
EM-Tec Silicon finder grid for either multiple small samples or correlative microscopy.
Conductive tabs to adhere samples such as powder on sample stubs order | Product page
EM-Tec stub gripper tweezers for the Ø9.5, Ø12.2 and Ø25mm JEOL cylinder sample stubs.
EM-Tec preparation stands for the JEOL cylinder stubs.
Value-Tec sample preparation tweezers.
Value-Tec dust blower.
Micro-Tec disposable scalpels.
Micro-Tec white PE Prep Board
Micro-Tec fine needles or preparing smaller samples.
Micro-Tec fine probes for preparing smaller samples.
Calibration tools for the JEOL NeoScope series table top SEMs
Recommended calibration tools for imaging and EDX analysis with the JEOL NeoScope series table top SEMs are:
Our JEOL NeoScope Starter Kit combines all the required basic supplies in one order.This starter kit provides the basic supplies necessary to support your SEM. It is an easy way to purchase a comprehensive kit of basic sample preparation required consumables and necessary calibration standards. The standards are for magnification and resolution checking of the electron microscope. This kit also includes a set of 5 sample preparation tweezers, the JV 40 stage adapter, allowing any M4 designed sample holder to be compatible, 5 versatile sample holders, including the variable 0-90° angle tilt holder, valuable when there is no tilt option on your JEOL system. The kit is also configured to be compatible with both pin stubs and JEOL cylinder stubs.
The Rave Scientific JEOL NeoScope user kit provides a flexible and easy way to purchase a comprehensive kit of the required basic sample preparation consumables and calibration standards. Standards are required for checking magnification, EDS and resolution in the electron microscope. All sample holders and standards are fully compatible with the JEOL NeoScope SEM. This kit also includes a set of 5 sample preparation tweezers, the JV 40 stage adapter, allowing any M4 designed sample holder to be compatible, 5 versatile sample holders, including the variable 0-90° angle tilt holder, valuable when there is no tilt option on your JEOL system. The kit is also configured to be compatible with both pin stubs and JEOL cylinder stubs. JEOL NeoScope Starter Kit Brochure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product | Part Number | Price | |
---|---|---|---|
JEOL NeoScope SEM User-Starter Kit Complete | RS-MN-99-100001-JEOL NS | $1,913.33 each | |
JEOL NeoScope SEM User-Starter Kit-No Calibration Samples | RS-MN-99-100001-JEOL NC | $1,014.00 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec FG-1 Silicon Finder Grid Substrate with 144 fields of 1x1mm | RS-MN-10-008144 | $31.99 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec J26P JEOL Ø25mm adapter for pin stubs, Ø25x10mm | RS-MN-11-000523 | $29.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec SJ4 clear styrene storage box for 4 x Ø9.5mm JEOL cylinder stubs | RS-MN-13-095004 | $5.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec SJ5 clear styrene storage box for 4 x Ø12.2mm JEOL cylinder stubs | RS-MN-13-095005 | $9.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec SC12 clear styrene storage box for 12x Ø9.5mm JEOL/Ø12.2mm JEOL or 12 pin stubs | RS-MN-13-095012 | $9.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec single sided conductive copper SEM tape 6mm x 25mm | RS-MN-15-000806 | $19.99 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec double sided conductive copper SEM tape 6mm x 33m | RS-MN-15-000206 | $43.99 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec double sided conductive copper SEM tape 12mm x 33m | RS-MN-15-000212 | $75.99 each |
Product | Part Number | Price | |
---|---|---|---|
High purity conductive double sided adhesive carbon tabs, Ø12.5 mm, pkg/100 | RS-MN-15-000413 | $24.00 each |
Product | Part Number | Price | |
---|---|---|---|
High purity conductive double sided adhesive carbon tabs, Ø12mm, pkg/100 | RS-MN-15-000412 | $17.27 each | |
High purity conductive double sided adhesive carbon tabs, Ø9mm, pkg/104 | RS-MN-15-000409 | $17.27 each | |
High purity conductive double sided adhesive carbon tabs, Ø6mm, pkg/108 | RS-MN-15-000406 | $17.27 each |
Product | Part Number | Price | |
---|---|---|---|
High purity conductive double sided adhesive carbon tabs, 25mm, pkg/50 | RS-MN-15-000425 | $35.33 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec C30F water based conductive carbon paint, 40g bottle | RS-MN-15-001130F | $21.32 each | |
EM-Tec C32 water based conductive graphene-carbon paint, no VOC, 25g bottle | RS-MN-15-001132 | $22.53 each | |
EM-Tec AG46 water-based conductive silver paint, no VOC, 25g bottle | RS-MN-15-002146 | $110.00 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec C38 strong conductive carbon cement, 25g bottle | RS-MN-15-001138 | $17.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec AG42 strong and highly conductive silver cement, 15g bottle | RS-MN-15-002141 | $66.65 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec small multi stub preparation stand for 23 pin stubs | RS-MN-15-007523 | $26.65 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec medium multi stub preparation stand for 38 pin stubs | RS-MN-15-007538 | $30.65 each |
Product | Part Number | Price | |
---|---|---|---|
Micro-Tec PrepBoard, white HDPE , 29.5x24.5cm | RS-MN-15-008045 | $21.32 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec 3.NM general purpose tweezers, style 3, fine pointed tips, non-magnetic stainless steel | RS-MN-50-014030 | $3.99 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec 4.NM general purpose tweezers, style 4, fine pointed tips, non-magnetic stainless steel | RS-MN-50-014040 | $3.99 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec 7.NM general purpose tweezers, style 7, curved fine tips, non-magnetic stainless steel | RS-MN-50-014070 | $3.99 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec 5A.NM general purpose tweezers, style 5A, off-set finepointed tips, non-magnetic stainless steel | RS-MN-50-014055 | $3.99 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec set of 5 general purpose tweezers, includes style 3, 5, 5A, 7 and SS (slim long) non-magnetic stainless steel, Set/5 | RS-MN-50-014105 | $14.65 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec 12.AM scissor type short handle SEM pin stub gripper for Ø12.7mm pin stubs, anti-magnetic stainless steel | RS-MN-50-050013 | $9.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec 127G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel | RS-MN-50-050012 | $13.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec 190G.AM SEM pin stub gripper tweezers for Ø19mm pin stubs, anti-magnetic stainless steel | RS-MN-50-050019 | $13.32 each |
Product | Part Number | Price | |
---|---|---|---|
EM-Tec 254G.AM SEM pin stub gripper tweezers for Ø25.4mm pin stubs, anti-magnetic stainless steel | RS-MN-50-050025 | $15.99 each |
Product | Part Number | Price | |
---|---|---|---|
Micro-Tec PS1 probe set with Micro-Tec PV1 probe holder and Micro-Tec NS set of 8 fine pointed straight stainless steel needle probes, set | RS-MN-52-001011 | $13.32 each |
Product | Part Number | Price | |
---|---|---|---|
Micro-Tec PS2 probe set with Micro-Tec PV1 probe holder and Micro-Tec NAS set of 8 fine pointed angled stainless steel needle probes, set | RS-MN-52-001021 | $14.65 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec set with 4 probes (VP1/VP2/VP4/VP5) in plastic pouch, 410 stainless steel, set/4 | RS-MN-52-001076 | $11.99 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec set with 5 probes (VP1/VP2/VP3/VP4/VP6) in plastic pouch, 410 stainless steel, set/5 | RS-MN-52-001077 | $14.65 each |
Product | Part Number | Price | |
---|---|---|---|
Value-Tec DB3 long tip air blower / hand duster | RS-MN-52-003005 | $13.32 each |
Product | Part Number | Price | |
---|---|---|---|
Micro-Tec disposable carbon steel scalpels set with plastic handle contains 2x #10/11/15/20/22, sterile, box/10 | RS-MN-52-004129 | $9.32 each |